Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

units of time.

Posted 2011/12/16 3:09 GMT-5 Low-Frequency Electromagnetics Version 4.2a 1 Reply

Isabel Gil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Comsol forum,

when I use the argument "t", is it supposed that time is using the S.I., i.e. seconds?

Thanks in advance,
best regards.
1 Reply Last Post 2011/12/16 15:39 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/12/16 15:39 GMT-5
Hi

indeed "t" by default is in seconds, if you need minutes, hours, days or years you can get it via the units multiplier, i.e. t[1/min] is a unit-less result expressed in minutes, just like td=t[1/d] is the day count ...

check the doc on the different time units

--
Good luck
Ivar
Hi indeed "t" by default is in seconds, if you need minutes, hours, days or years you can get it via the units multiplier, i.e. t[1/min] is a unit-less result expressed in minutes, just like td=t[1/d] is the day count ... check the doc on the different time units -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content