Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Material properties
Posted 2012/04/24 0:38 GMT-4 Version 4.1, Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hello !
I have a question.
if I put pressure on the model, do material properties change ? as the elasticity. why does frequency change
Can someone help me ?
I have a question.
if I put pressure on the model, do material properties change ? as the elasticity. why does frequency change
Can someone help me ?
1 Reply Last Post 2012/04/24 14:48 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
that depends what you are modelling, you might be in "solid" then you can get stress stiffening, in certain cases, but for that you need to combine a stationary stres analysis and use that as the starting point for an eigenfrequency analysis
But yu can also have a pressure dependent material that depends on the material you are using and the physics you have selected
--
Good luck
Ivar
that depends what you are modelling, you might be in "solid" then you can get stress stiffening, in certain cases, but for that you need to combine a stationary stres analysis and use that as the starting point for an eigenfrequency analysis
But yu can also have a pressure dependent material that depends on the material you are using and the physics you have selected
--
Good luck
Ivar