Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Erosion, FSI, Moving Mesh

Posted 2012/06/13 15:33 GMT-4 0 Replies

Rocksmida
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to simulate the erosion process via COMSOL. The riverbed can be eroded away due to the river flow. The change of the morphology of the bed can be modeled using the calculated velocity. Or, I can describe it this way, given a flow with velocity u, the bed surface will change due to the flow; the flow will be affected due to the bed surface change; (Interaction between the flow and the bed surface).

The question is can I use the moving mesh module or the ALE method in COMSOL to model the interaction between bed and flow?

Any comments or suggestions are welcomed. Thank you.
0 Replies Last Post 2012/06/13 15:33 GMT-4
COMSOL Moderator

Hello Rocksmida

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content