Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

solid mechanics module help - using displacement to solve for force

Posted 2012/08/07 13:31 GMT-4 Structural Mechanics Version 4.2a 0 Replies

Drew Rogers
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am working with the Solid Mechanics module to take experimental deformation data of a bead in a gel and known material properties of both the gel and bead to calculate the force acting of the bead.

Please Help, I'm not sure how to solve for the force here. Relatively new to COMSOL.

Thanks
0 Replies Last Post 2012/08/07 13:31 GMT-4
COMSOL Moderator

Hello Drew Rogers

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content