Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

integral value of variable till a radius value interior to the circle radius

Posted 2012/09/10 7:28 GMT-4 Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.0a 1 Reply

Utsav Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I want to get integral of a variable till a point in the circle of radius r0, where this point would vary from 0 to r0. That means I want to get for all radius value till r0. With intop operator whole geometry is selected so, for interior points I tried to use if statement where for till the radius point where I intend to calculate is 1 and for the rest after that is 0. This gives the value at desired r. Now, since I want it for all r value from o to r0 what condition should I write in IF statement condition so that it takes the range from 0 to r0 with discrete step points defined by me.

Best
1 Reply Last Post 2012/09/19 2:41 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/09/19 2:41 GMT-4
Hi

Is it this what you are looking for ? (unfortunately I have only 4.3 actif

--
Good luck
Ivar
Hi Is it this what you are looking for ? (unfortunately I have only 4.3 actif -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content