Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Model saved in 4.2 need to be saved in 4.1

Posted 2012/10/26 3:57 GMT-4 Version 4.1 4 Replies

Remsha Sonail
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi friends!

i am trying a model of air and hydrogen mixing phenomena. i was using version 4.2 now i am using 4.1. The model i have, is saved in 4.2 i need it to be saved in 4.1 so that i can run it .

Anyone who want help me plz send his/her email address so that i can send the model.
4 Replies Last Post 2012/10/29 3:57 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/10/26 5:25 GMT-4
Hello
No easy way to go backwards ;) best is to rebuild it from scratch, or to dump it in matlab format and copy formulas from there

Anyhow I can only recommend to update to a more recent version, you will gain a lot in productivity

--
Good luck
Ivar
Hello No easy way to go backwards ;) best is to rebuild it from scratch, or to dump it in matlab format and copy formulas from there Anyhow I can only recommend to update to a more recent version, you will gain a lot in productivity -- Good luck Ivar
Remsha Sonail
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/10/26 11:35 GMT-4
thank you for reply Ivar.
i have a problem that i have license for 4.1 version . can you help me to guide to rebuilt it.

thank you for reply Ivar. i have a problem that i have license for 4.1 version . can you help me to guide to rebuilt it.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/10/26 13:41 GMT-4
Hi
get someone to save the 4.2 to a html report or an ".m" file and read from there

--
Good luck
Ivar
Hi get someone to save the 4.2 to a html report or an ".m" file and read from there -- Good luck Ivar
Remsha Sonail
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012/10/29 3:57 GMT-4
i have this model .
i have this model .

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content