Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Can I still see all the equations in 4.0?

Posted 2010/06/16 11:31 GMT-4 3 Replies

Kai Zhou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Thanks
3 Replies Last Post 2010/06/17 14:38 GMT-4
John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/16 13:48 GMT-4
Options > Preferences > Model Builder > Show Equation View
Options > Preferences > Model Builder > Show Equation View
John
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/17 9:06 GMT-4
Typically, it is not enough to do "Show Equation View". One point is that you have to have selected a domain/boundary/whatever before you look at the equations or nothing will show up.

If you do that and you still see no equations, then you may also have to click on the button above the (empty) table of equations. As you mouse over the button says "Restore Equation View", or something like that.

9 times out of 10 this gets you to see the equations you need....
Typically, it is not enough to do "Show Equation View". One point is that you have to have selected a domain/boundary/whatever before you look at the equations or nothing will show up. If you do that and you still see no equations, then you may also have to click on the button above the (empty) table of equations. As you mouse over the button says "Restore Equation View", or something like that. 9 times out of 10 this gets you to see the equations you need....
Kai Zhou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/17 14:38 GMT-4
thanks... that's really helpful...
thanks... that's really helpful...

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content