See How Multiphysics Simulation Is Used in Research and Development

Get Inspired by the Latest Simulation Projects

Papers and Presentations from the COMSOL Conference 2018

At the COMSOL Conference 2018, scientists and engineers from around the globe showcased their multiphysics simulation projects. See how researchers in your industry are currently using numerical modeling to optimize designs, streamline processes, and improve products by browsing the technical papers and presentations below. Use the Quick Search tool to find a specific presentation or filter by application area or conference location.

ISBN: 978-0-9910001-6-6



2018 - Allx

Modeling Confinement in Quantum Dot Solar Cells

J. Liu [1], M. Zubaer Hossain [1],
[1] Department of Mechanical Engineering, University of Delaware, Newark, DE, USA

The efficiency of the first and second generations of solar cell has hardly seen dramatically increase over the years, in which most PV cells cannot use about 55% of the energy of sunlight because a single material can not capture the entire spectrum of sunlight. To achieve the objective ... 詳細を見る

Finite Element Simulation of Impulse Arc Discharge

A. Chusov [1], E. Rodikova [1], M. Pinchuk [2], Y. Murashov [3], Vladimir Frolov [3], Dmitriy Ivanov [3],
[1] Streamer Electric Inc., St.Petersburg, Russia
[2] Institute for Electrophysics and Electrical Power, St.Petersburg , Russia
[3] St.Petersburg Polytechnical University, Russia

Damages caused by lightning overvoltages remains to be an important issue for electrical industry, putting limitations for efficiency of transmission and distribution of electrical energy. Modern solutions for lightning protection such as multichamber arresters (MCA) for overhead ... 詳細を見る

Adaptive Mesh Refinement: Quantitative Computation of a Rising Bubble Using COMSOL Multiphysics®

T. Preney [1], P. Namy [1], J. Wheeler [1]
[1] SIMTEC, Grenoble, France

The mesh is a key component in numerical simulations as it represents the spatial discretization of the model geometry. To accurately measure the variation of the unknowns, a relevant mesh should have a high density of degrees of freedom in regions where the norm of the gradient of the ... 詳細を見る

Light-tissue Interaction Modeling Using COMSOL Multiphysics® for Multi-layered Soft Tissues

Vysakh V [1], Sujatha Narayanan Unni [1],
[1] Indian Institutes of Technology Madras, Chennai, Tamil Nadu, India

Soft tissues are longest tissue structures found throughout a human body. It plays a vital role in connecting, providing support or surround other structures and organs of the body. Muscles, skin, tendons, ligaments, nerves, fibrous tissues, fat, blood vessels are commonly classified as ... 詳細を見る

Two-Phase Flow Modeling of Metal Vaporisation under Static Laser Shot Using a Double ALE Method

Y. A. Mayi [1], M. Dal [1], P. Peyre [1], M. Bellet [2], C. Metton [3], C. Moriconi [3], R. Fabbro [1],
[1] PIMM Laboratory, UMR 8006 Arts et Métiers-CNRS-CNAM, Paris, France
[2] CEMEF Laboratory, UMR 7635 PSL Research University MINES ParisTech, Sophia Antipolis, France
[3] Safran, Paris Cedex, France

Additive manufacturing gathers technologies where near net shape components are produced by depositing successive layers of materials. Among these technologies, the Layer Beam Melting (LBM) process – often referred to as Selective Laser Melting (SLM) – is garnering industrial interest, ... 詳細を見る

Study of Bending Losses in Optical Fibers using COMSOL Multiphysics®

Ashitosh Velamuri [1], Krupal Patel [2], Ishan Sharma [2], Shakti Gupta [2], Pradeep Kumar Krishnamurthy [1],
[1] Center for Lasers and Photonics, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India
[2] Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India

In FTTH, optical fibers are frequently bent at the corners of the walls causing the propagating light in the fiber to radiate away which results in transmission losses and limits reach of the fiber network. A large number of studies have been reported in the literature to compute bend ... 詳細を見る

Design and Simulation of a MEMS-Based Ultrasonic Transducer for Viscosity Sensing Applications

Rahul Goyal [1], Divya Mohan Yadav [1],
[1] Indian Institute of Science, Bangalore, Karnataka, India

Technologies based on micro electro mechanical systems (MEMS) present advantages for rheological applications as they enable the fabrication of smaller sensors with faster response times. In this work we propose fabrication parameters and simulation of a MEMS viscometer. This research ... 詳細を見る

Multi-objective Optimization of Microneedle Design for Transdermal Drug Delivery

M. Sarmadi [1], K. McHugh [1], R. Langer [1], A. Jaklenec [1],
[1] David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, MA, USA

Microneedles have been recognized as a potent and novel method of transdermal drug delivery over the last decade. Despite recent advances in nano- and microfabrication techniques, less is known about the structural properties and design optimization of microneedles in a systematic ... 詳細を見る

Modeling of Random Nanostructures Based on SEM Images and Analysis of Resulting RF-Performance

K. Neumann [1], J. Moeller [1], L. Kuehnel [2], A. Rennings [1], N. Benson [2], R. Schmechel [2], D. Erni [1],
[1] General and Theoretical Electrical Engineering (ATE), University of Duisburg-Essen, and CENIDE – Center for Nanointegration Duisburg-Essen, Duisburg, Germany
[2] Institute for Nanostructures and Technology (NST), University of Duisburg-Essen, and CENIDE – Center for Nanointegration Duisburg-Essen, Duisburg, Germany

In the last few years printable electronics has gained a great deal of interest since it promises mechanical flexibility and extremely low production costs. One approach to achieve printable electronic devices relies on the usage of specific inks containing e.g. dispersed semiconductor ... 詳細を見る

Finite Element Prediction of Laser-Material Interaction Using COMSOL Multiphysics®

E.C. Chevallier [1], V. Bruyère [1], P. Namy [1],
[1] SIMTEC, Grenoble, France

Surface engineering is a key technology used in a wide range of sectors in industry. Among other techniques, it involves adding functionality to a surface. This can be performed by creating a specific topography to a surface using laser texturing. The objective of the work presented in ... 詳細を見る

First
Previous
1–10 of 463