Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

controlling the flow from inlet with respect to time

Posted 2016/01/25 7:42 GMT-5 Fluid & Heat, Microfluidics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.2 1 Reply

Gnana Ganesh Ekambaram
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm doing droplet separation in comsol and I want to know is it possible to control the flow rate in an inlet at the specific time which means I need to start the flow (say,Air) at 40ms.
1 Reply Last Post 2016/01/26 4:20 GMT-5
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016/01/26 4:20 GMT-5
Hi

Define a step function that starts at t = 40 s. Let's assume it has the name "step1". Than call it as the boundary condition, step1(t). The issue of the time dependent boundary condition is discussed several times in this forum.

BR
Lasse
Hi Define a step function that starts at t = 40 s. Let's assume it has the name "step1". Than call it as the boundary condition, step1(t). The issue of the time dependent boundary condition is discussed several times in this forum. BR Lasse

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content