Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to add shear strain as a boundary condition?

Posted 2010/10/29 14:19 GMT-4 1 Reply

Yi Han
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a squre domain, how can I constraint the displacement of boudary condition to make the squre have a shear deformation?
1 Reply Last Post 2010/10/30 4:24 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/10/30 4:24 GMT-4
Hi

take a look at the "roller" BC's but this will also restrain the "height", next is with V4 and the rigid connector you can block a rotation, but you might get other "side effects" depends what you are modelling

--
Good luck
Ivar
Hi take a look at the "roller" BC's but this will also restrain the "height", next is with V4 and the rigid connector you can block a rotation, but you might get other "side effects" depends what you are modelling -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content