Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Increase number of sides in a circle
Posted 2010/11/25 5:10 GMT-5 3 Replies
Please login with a confirmed email address before reporting spam
In comsol the circle is represented as a polygon with 64 (?) sides, is there any way to increase this number?
3 Replies Last Post 2010/11/26 3:04 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
is it the graphics rendering or the neshed geometry ?
for the graphics there are some options settings in the prefereces (at different places in 3.5 and in the new v4)
for the mesh its in the meshing parametes, either the default to be set to finer or more, or by tweeking the custom settings
--
Good luck
Ivar
is it the graphics rendering or the neshed geometry ?
for the graphics there are some options settings in the prefereces (at different places in 3.5 and in the new v4)
for the mesh its in the meshing parametes, either the default to be set to finer or more, or by tweeking the custom settings
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
It is in the graphics rendering, and I found the option you refered to.
Thank you!
Thank you!
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hei
Ja, (nesten) alt hjemmer seg derinne, det er bare hvor ?
--
Good luck
Ivar
Ja, (nesten) alt hjemmer seg derinne, det er bare hvor ?
--
Good luck
Ivar