Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

variable name of magnetization mf.Mr inside magnetic field application mode in V4.0a

Posted 2011/02/09 4:09 GMT-5 Low-Frequency Electromagnetics Version 4.0a, Version 4.1 1 Reply

Behrooz Rezaeealam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i was wondering how can i find the variable names for mf interface (for example: magnetization vector in 2D-axisymmetry=? )
in V4.1 it is mf.Mr and mf.Mz and mf.Mphi, but i can not find the names inside V4.0a,
thanks for any help
1 Reply Last Post 2011/02/09 5:28 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/02/09 5:28 GMT-5
Hi

normally these are more or less the same, as 4.0 was an "early" version things have only improved and are more stablein V4.1. You have the intrnal equations also in V4.0, turn them on in the preferences

--
Good luck
Ivar
Hi normally these are more or less the same, as 4.0 was an "early" version things have only improved and are more stablein V4.1. You have the intrnal equations also in V4.0, turn them on in the preferences -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content