Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

general pde mode, spherical coordinates

Posted 2011/03/10 15:52 GMT-5 6 Replies

Parviz Ahmadian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, everybody
I want to solve a differential equation in spherical coordinates (just “R” component dependent)
By “General PDE mode” (comsol3.4).
But there is no default spherical coordinates in the comsol .
Now how can I resolve this problem?
The simulation geometry is as following:
A----------------------------------------B
Regards
parviz
6 Replies Last Post 2013/02/20 13:13 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/03/11 1:24 GMT-5
Hi

define the coordinate yourself, see the KB (and other treads on the FORUM)

--
Good luck
Ivar
Hi define the coordinate yourself, see the KB (and other treads on the FORUM) -- Good luck Ivar
Parviz Ahmadian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/03/11 13:33 GMT-5
thanks ivar

but i can not find the KB.

can i pre-arrenge the my equation and so, use the cartesian coordinates?

regards
parviz
thanks ivar but i can not find the KB. can i pre-arrenge the my equation and so, use the cartesian coordinates? regards parviz
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/03/11 15:34 GMT-5
Hi

sorry, KB is the sort for the official Knowledge Base of COMSOL


www.comsol.eu/support/knowledgebase/browse/900/

--
Good luck
Ivar
Hi sorry, KB is the sort for the official Knowledge Base of COMSOL http://www.comsol.eu/support/knowledgebase/browse/900/ -- Good luck Ivar
Parviz Ahmadian
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/03/12 15:20 GMT-5
thanks ivar

regards
parviz
thanks ivar regards parviz
Stefano Iannacone
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/02/20 8:26 GMT-5
Hi

I am facing the same problem you had few years ago. Could you please tell me how you solved this issue?
I have to model mass transport in spherical coordinates.

I cannot access to KB that's why I am asking.

Thanks in advance
Hi I am facing the same problem you had few years ago. Could you please tell me how you solved this issue? I have to model mass transport in spherical coordinates. I cannot access to KB that's why I am asking. Thanks in advance
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/02/20 13:13 GMT-5
Hi

you can define the spherical coordinate system, andthen use the references of the "user coordinate" system "sys2..." to define or transform your variable (oth ways actually)

But COMSOL by default work in cartesian coordiantes so you need to map ack and perhaps, for the results forward ;)

--
Good luck
Ivar
Hi you can define the spherical coordinate system, andthen use the references of the "user coordinate" system "sys2..." to define or transform your variable (oth ways actually) But COMSOL by default work in cartesian coordiantes so you need to map ack and perhaps, for the results forward ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content