Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to understand the equation for shell

Posted 2018/05/15 9:14 JST General Version 5.2 1 Reply

Yinghui Shi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am new for comsol. I am trying to understand the equation use for comosl. The equation for study controlled contained term for "0 = div * sigma + Fv + sigma (Mv X n) z/d^2".

sorry for the fomation for the equation. * is represented for dot. sigma is represented for stress.

How to understand each term?

Regards,

Margaret

1 Reply Last Post 2018/05/15 22:42 JST
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2018/05/15 22:42 JST

Hi Margaret,

You cannot really learn much from this equation. You need to refer to the theory section in the chapter about the Shell interface in the user's guide to get any real information.

What is shown in the equation display should not be considered as the complete theory more than for some simple features. It is more of an indication of what a certain feature does. In this case, the intent is to show the general solid mechanics equilibrium equations, but with a volume load which comes also from a bending moment. It is conceptual, at best.

Regards,
Henrik

-------------------
Henrik Sönnerlind
COMSOL
Hi Margaret, You cannot really learn much from this equation. You need to refer to the theory section in the chapter about the Shell interface in the user's guide to get any real information. What is shown in the equation display should not be considered as the complete theory more than for some simple features. It is more of an indication of what a certain feature does. In this case, the intent is to show the general solid mechanics equilibrium equations, but with a volume load which comes also from a bending moment. It is conceptual, at best. Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content