Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

applying load for rhe deformed configuration

Posted 2011/05/25 1:58 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Mesh, Structural Mechanics Version 3.5a 0 Replies

Prithivirajan Veerappan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,
say i have cantilever beam ..... initially i prescribe the tip displacement as some value and i get the deformed structure....

now i want to apply load to the deformed configuration (taking this as the initial configuration)!!!!

how to change the settings in the solver manager.....


regards
prithivi
0 Replies Last Post 2011/05/25 1:58 GMT-4
COMSOL Moderator

Hello Prithivirajan Veerappan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content