Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
finding cordinates
Posted 2011/05/31 15:08 GMT-4 Fluid & Heat Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
hi,
i use level set method for two phase modelling, as you know this method is based on the fixed mesh, after some times there is a deformation on one of my fluid domain and I want to know the new coordinates of the interface. how can I do that ?
As the time goes on, the interface will change. Is there any way that I can find out the new coordinates of the interface. for example a droplet in an electric field elongates
Best
i use level set method for two phase modelling, as you know this method is based on the fixed mesh, after some times there is a deformation on one of my fluid domain and I want to know the new coordinates of the interface. how can I do that ?
As the time goes on, the interface will change. Is there any way that I can find out the new coordinates of the interface. for example a droplet in an electric field elongates
Best
1 Reply Last Post 2011/06/14 13:23 GMT-4