Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/06/06 7:12 GMT-4
Your question really puzzles me but what is your study type? are you using Eigen Frequency mode?
I would start from there and get the eigen frequencies of the sphere as an initial guess.
Your question really puzzles me but what is your study type? are you using Eigen Frequency mode?
I would start from there and get the eigen frequencies of the sphere as an initial guess.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/06/06 8:03 GMT-4
Hi Maryam,
I am working on almost a similar case. I think you have to run sweep simulation for diffirent wavelengths and see at which wavelength the resonance occures. If can't do that , just send me your model I will have a look on it may be I can fix something.
Hope this will be useful.
Regards
Ahmed
Hi Maryam,
I am working on almost a similar case. I think you have to run sweep simulation for diffirent wavelengths and see at which wavelength the resonance occures. If can't do that , just send me your model I will have a look on it may be I can fix something.
Hope this will be useful.
Regards
Ahmed
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/06/11 3:35 GMT-4
Hi Ahmed,
i change the frequency and i see the plasmon and my 2D model work well.if you work on the similar case ,i would be glad to have a contact with you by email
best regards
Maryam
Hi Ahmed,
i change the frequency and i see the plasmon and my 2D model work well.if you work on the similar case ,i would be glad to have a contact with you by email
best regards
Maryam
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/06/11 3:52 GMT-4
Hi Ali
my research subject is about microsphere biosensor. for the sensing application, we use metal nanoparticle on the surface of microsphere. with generating plasmon around the metal nanoparticles electric field is enhanced.
i didnt work with eigenfrequency mode.my 2D model work well but i want to simulate 3D model ,because my system is microsphere,but i have not did it!! what is your work?
regards
Maryam
Hi Ali
my research subject is about microsphere biosensor. for the sensing application, we use metal nanoparticle on the surface of microsphere. with generating plasmon around the metal nanoparticles electric field is enhanced.
i didnt work with eigenfrequency mode.my 2D model work well but i want to simulate 3D model ,because my system is microsphere,but i have not did it!! what is your work?
regards
Maryam
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
2011/06/14 1:31 GMT-4
what is your work?
regards
Maryam
I do Structural FEM Simulation for a company. Good luck with your Project.
[QUOTE]
what is your work?
regards
Maryam
[/QUOTE]
I do Structural FEM Simulation for a company. Good luck with your Project.