Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

probe plot

Posted 2011/09/22 16:52 JST 1 Reply

skyblue
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

where do I activate probe plot in comsol 4.2..

Thanks!!
Vani.
1 Reply Last Post 2011/09/23 3:09 JST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011/09/23 3:09 JST
Hi

in the solver nodes, open the tabs plot while solving

--
Good luck
Ivar
Hi in the solver nodes, open the tabs plot while solving -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content