Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

help needed

Posted 2019/01/27 9:25 GMT-5 Battery Design 1 Reply

大卫 王
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is the multi-component Maxwell transfer equation suitable for dynamic studies? Can COMSOL do fuel cell dynamics research?

1 Reply Last Post 2019/01/29 3:36 GMT-5
Henrik Ekström COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2019/01/29 3:36 GMT-5

The multi-component Maxwell-Stefan equations (The Transport of Concentrated Species interface in COMSOL) can be formulated in the time domain and are hence possible to use for dynamic simulations.

Note that you typically also need to couple them to Navier-Stokes, Brinkman or the Darcy equation for to model the velocity and pressure propagation of the fluid. The coupled system can also be solved in the time-domain.

The multi-component Maxwell-Stefan equations (The Transport of Concentrated Species interface in COMSOL) can be formulated in the time domain and are hence possible to use for dynamic simulations. Note that you typically also need to couple them to Navier-Stokes, Brinkman or the Darcy equation for to model the velocity and pressure propagation of the fluid. The coupled system can also be solved in the time-domain.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content