Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency Selective Surface, Complementary Split Ring Resonator

Posted 2019/02/21 12:15 GMT-5 Version 5.3 3 Replies

Rodolfo Del Rosario
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I have a problem figuring out where can i find c1 which is being stated by no 2. please help. 1 On the Work Plane toolbar, click Booleans and Partitions and choose Difference. 2 Select the object c1 only.

Attachments:

3 Replies Last Post 2019/02/21 12:27 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2019/02/21 12:21 GMT-5

Hello Rodolfo,

Look on the left edge of your screenshot and you'll see that there a geometry object called c1 in the Model Builder tree structure. In this case, it looks like it is the first circle you drew.

Best,

Jeff

-------------------
Jeff Hiller
Hello Rodolfo, Look on the left edge of your screenshot and you'll see that there a geometry object called c1 in the Model Builder tree structure. In this case, it looks like it is the first circle you drew. Best, Jeff
Rodolfo Del Rosario
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2019/02/21 12:25 GMT-5

Hi;

It says there that select object c1 only. How to input this? if i will click the c1 at the left it will return to previous steps that i have.

Hi; It says there that select object c1 only. How to input this? if i will click the c1 at the left it will return to previous steps that i have.
Rodolfo Del Rosario
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2019/02/21 12:27 GMT-5

I got it already, thanks. i need to click the manual to choose c1.

I got it already, thanks. i need to click the manual to choose c1.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content