Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Regarding physical pendulum model
Posted 2011/12/16 11:23 GMT-5 Structural Mechanics Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I tried to extrude the 2d geometry and made a 3d pendulum, included solid stress strain (transient ) and moving mesh (transient). I gave the same initial values of velocity. But, when I solve it , the pendulum moves to a particular amplitude and then stops. Even if we decrease or increase the time or velocity, the pendulum moves the same distance. The solution takes very less time compared to the 2d geometry. How to get a 3d model pendulum ?? Can someone send us a 3D model physical pendulum ..
Thanking you in advance
Yadu
Hello Yadu Krishnan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.