Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plane symmetry /// Solid Mechanics Module

Posted 2020/01/17 12:03 GMT-5 Structural Mechanics Version 5.0 4 Replies

Hossein Babaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I have a 3D model with a symmetry plane. I cannot find any boundary condition in my COMSOL's 5.0 Solid Mechanics module for symmetry. Am I missing it, or the symmetry boundary condition is forced by other available conditions indirectly?

Please help with this.

Cheers, Hossein

4 Replies Last Post 2020/01/21 10:17 GMT-5
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2020/01/17 12:28 GMT-5

Hossein,

Symmetry BC is under More Constraints, as shown in the attached image.

Regards,

Sergei

Hossein, Symmetry BC is under More Constraints, as shown in the attached image. Regards, Sergei

Attachments:

Hossein Babaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2020/01/17 12:47 GMT-5

Dear Sergei,

Thanks for your quick response. My COMSOL v5.0 doesn't seem to have "More Constrains". Please see the attached. Could be hidden?

Thanks, Hossein

Dear Sergei, Thanks for your quick response. My COMSOL v5.0 doesn't seem to have "More Constrains". Please see the attached. Could be hidden? Thanks, Hossein
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2020/01/20 2:19 GMT-5

Hi Hossein,

The specialized boundary conditions under More Constraints are only present if you have the Structural Mechanics Module license. If not, you will have to express the boundary condition using the Prescribed Displacement node.

Regards,
Henrik

-------------------
Henrik Sönnerlind
COMSOL
Hi Hossein, The specialized boundary conditions under More Constraints are only present if you have the Structural Mechanics Module license. If not, you will have to express the boundary condition using the Prescribed Displacement node. Regards, Henrik
Hossein Babaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2020/01/21 10:17 GMT-5

Dear Henrik,

Thank you, I forced the symmetric boundary condition by using the Prescribed Displacement node, forcing zero out-of-symm.-plane displacement, and not imposing any other boundary condition on the symm. plane.

Cheers, Hossein

Dear Henrik, Thank you, I forced the symmetric boundary condition by using the Prescribed Displacement node, forcing zero out-of-symm.-plane displacement, and not imposing any other boundary condition on the symm. plane. Cheers, Hossein

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content