Robert Koslover
                                                                                                                                                    Certified Consultant
                                                         
                            
                         
                                                
    
        Please login with a confirmed email address before reporting spam
     
    
 
                                                Posted:
                            
                                5 years ago                            
                            
                                2020/07/06 23:44 GMT-4                            
                        
                        Updated:
                            
                                5 years ago                            
                            
                                2020/07/06 23:45 GMT-4                            
                        
                        
                                                    I use the RF module and you asked about the wave optics module, but they are usually similar, so.... I use the arg function {   arg (put field component here)  } applied to the complex field.  This gives you the argument (i.e., the phase in radians) of the complex field component in question.  You can apply it at a single point or (if you set up a probe with an average over a line)  you can apply it to a field average across a port, for better accuracy.
    -------------------
    Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara                                                 
                                                
                            I use the RF module and you asked about the wave optics module, but they are usually similar, so.... I use the arg function {   arg (put field component here)  } applied to the complex field.  This gives you the argument (i.e., the phase in radians) of the complex field component in question.  You can apply it at a single point or (if you set up a probe with an average over a line)  you can apply it to a field average across a port, for better accuracy.