Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Singular matrix and failed to find a solution

Posted 2010/01/27 9:26 GMT-5 2 Replies

Thanh Long Vu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,
I just have a error like this when i increase the mesh

> ??? Java exception occurred:
> Exception:
> com.femlab.jni.FlNativeException: Singular matrix
> Messages:
> Singular matrix
>
> Stack trace:
> at umfpack.cpp, row 597, ()
> at com.femlab.solver.FlSolver.femStatic(Native Method)
> at com.femlab.solver.FemStatic.run(Unknown Source)
> at com.femlab.server.FlRunner.run(Unknown Source)
> at com.femlab.server.q.run(Unknown Source)
> at com.femlab.util.i.run(Unknown Source)
> at com.femlab.util.aa.run(Unknown Source)
>
> Error in ==> femsolver at 368
> solobj.smartRunner(report, loopTime);
>
> Error in ==> femstatic at 93
> varargout = femsolver(mfilename,'FemStatic',varargin{:});

And an other problem:
> Warning:
> Failed to find a solution:
> The relative error (0.044) is greater than the relative tolerance.
> Returned solution has not converged.

How can i solve this problem? anyone knows?
Thank u very much
Long
2 Replies Last Post 2010/06/23 9:49 GMT-4
Leonardo Babun
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/01/27 10:17 GMT-5
Hi Long...This error is most related with the the geometry and the mesh...take care about to use objects with small geometries and meshed too big...It is important to find a proportional relation between both concepts. a good solution is to make a selective mesh by subdomains or boundaries.

Hope this help...

Leo

Hi Long...This error is most related with the the geometry and the mesh...take care about to use objects with small geometries and meshed too big...It is important to find a proportional relation between both concepts. a good solution is to make a selective mesh by subdomains or boundaries. Hope this help... Leo
Joseph Maduzia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/06/23 9:49 GMT-4
I actually get the singular matrix problem when I decrease my mesh size! My mesh isn't good enough for me to confidently use it, but I can't decrease my mesh size overall without getting the singular matrix error. I've tried meshing different sizes per subdowmain based on flow and HT gradients, but I still get the singular matrix problem with this...

Thank You,

Joe
I actually get the singular matrix problem when I decrease my mesh size! My mesh isn't good enough for me to confidently use it, but I can't decrease my mesh size overall without getting the singular matrix error. I've tried meshing different sizes per subdowmain based on flow and HT gradients, but I still get the singular matrix problem with this... Thank You, Joe

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content