Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PCB Electromagnetic Wave Design

Posted 2021/07/02 1:17 JST Electromagnetics, Low-Frequency Electromagnetics 1 Reply

Mateo Cubillos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Looking for help with taking a pcb design and simulating the electromagnetic fields induced by the current flowing through the pcb design.

1 Reply Last Post 2021/07/02 3:26 JST
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago 2021/07/02 3:26 JST

If you don't have a more specific question, then I encourage you to work through some of the related models provided by Comsol in the Application Library. I'm guessing that you might want to look at the planar_pcb_coil.mph example, among others.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
If you don't have a more specific question, then I encourage you to work through some of the related models provided by Comsol in the Application Library. I'm guessing that you might want to look at the planar_pcb_coil.mph example, among others.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content