Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Anechoic and Reverberant Chamber

Posted 2022/01/14 22:25 JST 1 Reply

Giada Cardellino
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, somebody knows how to model in comsol an anechoic and reverberant chamber with a plate vibrating inside to evaluate the pressure level inside both the chambers? Thank you in advance!

1 Reply Last Post 2022/01/15 2:20 JST
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022/01/15 2:20 JST

To achieve minimal reflections you can either use the impedance boundary condition (with impedance set to the acoustic impedance of your medium) or (better) use a perfectly matched layer.

To have reverberations set the impedance boundary condition to something other than the medium impedance. Or use the hard wall boundary condition.

To achieve minimal reflections you can either use the impedance boundary condition (with impedance set to the acoustic impedance of your medium) or (better) use a perfectly matched layer. To have reverberations set the impedance boundary condition to something other than the medium impedance. Or use the hard wall boundary condition.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content