Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Adding more values to Colorbar

Posted 2022/12/11 7:48 GMT-5 1 Reply

Lars Eggimann
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

I would like to display more values on the Colorbar. The temperaturegradiant is only 1 degree and therefore i have only one value on my colorbar. I would like to display the decimal points on the colorbar.

Thank you.

Attachments:

1 Reply Last Post 2022/12/13 18:11 GMT-5
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022/12/13 18:11 GMT-5

Get into the Settings window for the plot group in question. Then scroll down to where you see Number Format and expand that pull-down menu. Click the Manual color legend settings checkbox. Then put in a larger number (e.g., 8) in the box where it says Precision: .

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Get into the Settings window for the plot group in question. Then scroll down to where you see Number Format and expand that pull-down menu. Click the Manual color legend settings checkbox. Then put in a larger number (e.g., 8) in the box where it says Precision: .

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content