Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MEF in time dependent

Posted 2024/02/25 7:22 GMT-5 Electromagnetics 1 Reply

JiaLe Cai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to apply a transient current to a toroidal coil. I use the mef module and time dependent research. Why can't I get the results?

1 Reply Last Post 2024/02/26 22:45 GMT-5
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2024/02/26 22:45 GMT-5
Updated: 2 years ago 2024/02/26 22:45 GMT-5

Comsol models typically require many inputs, settings, parameters, etc. You probably made one or more mistakes in setting up your model. I encourage you to provide more information. Also, consider uploading your model to the forum so that other Comsol Multiphysics users can help you find and fix the error(s).

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Comsol models typically require many inputs, settings, parameters, etc. You probably made one or more mistakes in setting up your model. I encourage you to provide more information. Also, consider uploading your model to the forum so that other Comsol Multiphysics users can help you find and fix the error(s).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content