Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Growing/Expanding domain

Posted 2024/05/01 4:31 GMT-4 Geometry, Mesh, Physics Interfaces 3 Replies

Ilyes Bensemmane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I'm working on a three-layer model where my middle domain will grow as a function of time (see the blue boundary in image), I have a problem how to find or define a physics or a method to make this middle domain grow knowing that I use the temporal solver.

Attachments:

3 Replies Last Post 2024/05/02 2:34 GMT-4
HC L solid mechanics
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2024/05/01 5:33 GMT-4
Updated: 2 years ago 2024/05/01 8:32 GMT-4

You probably might employ a thermal expansion material.

You probably might employ a thermal expansion material.
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/01 17:25 GMT-4

Depending on the physics or mechanics that is causing the growth there may be different options. You may want to look into the options provided by the moving mesh and/or deformed mesh methods.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Depending on the physics or mechanics that is causing the growth there may be different options. You may want to look into the options provided by the moving mesh and/or deformed mesh methods.
Ilyes Bensemmane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/02 2:34 GMT-4

thank you for your reply, i have tested the defromed geometry option, i was able to move the forntier but the problem is that in the simulation there is no change it always refers to the initial domains for calculations, the domaine is not updated

thank you for your reply, i have tested the defromed geometry option, i was able to move the forntier but the problem is that in the simulation there is no change it always refers to the initial domains for calculations, the domaine is not updated

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content