Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulating partial discharge (PD) using RF module

Posted 2024/05/29 13:54 GMT-4 Electromagnetics, RF & Microwave Engineering, Modeling Workflow 5 Replies

hamed ahmadnia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to simulate a cavity or void that acts as a PD to see its electromagnetic waves. Is there any way to do it?

5 Replies Last Post 2024/05/30 21:15 GMT-4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/29 14:47 GMT-4

That may be possible in a time dependent study in the RF module.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
That may be possible in a time dependent study in the RF module.
Hamed Ahmadnia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/29 18:27 GMT-4

Hi Edgar,

Yes, I know it is possible, but I don't know how to do that. For example, how do we define boundary conditions and lumped ports for it?

Hi Edgar, Yes, I know it is possible, but I don't know how to do that. For example, how do we define boundary conditions and lumped ports for it?
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/30 2:52 GMT-4

This needs extensive analysis of your project. Partial discharge comes in many flavours. I advise to check application library examples to learn about available BCs, ports and the like. Start simple and increase complexity step by step.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
This needs extensive analysis of your project. Partial discharge comes in many flavours. I advise to check application library examples to learn about available BCs, ports and the like. Start simple and increase complexity step by step.
Hamed Ahmadnia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/30 11:01 GMT-4

I understand your point but found nothing related to this topic in the library examples.

I understand your point but found nothing related to this topic in the library examples.
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2024/05/30 21:15 GMT-4
Updated: 1 year ago 2024/05/30 21:16 GMT-4

Perhaps take a look at the plasma module and the examples in the application gallery? https://www.comsol.com/plasma-module and https://www.comsol.com/models?q=partial%20discharge

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Perhaps take a look at the plasma module and the examples in the application gallery? https://www.comsol.com/plasma-module and https://www.comsol.com/models?q=partial%20discharge

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content