Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Approximation curve by an exponential

Posted 2013/01/16 0:30 JST 1 Reply

M Francois
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I would like to know if it's possible to approximate a curve by an exponential one determine and plot it on Comsol.

Thks
1 Reply Last Post 2013/01/16 4:25 JST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/01/16 4:25 JST
Hi
you can import the data into a interpolation file, then create an exp function and optimise the parameters to fit in a means square way to the data set, but it's somewhat an overkill to use COMSOL for that, you can also ask the interpolation function to approximate yor data, but I believe its limited to poloynomials

--
Good luck
Ivar
Hi you can import the data into a interpolation file, then create an exp function and optimise the parameters to fit in a means square way to the data set, but it's somewhat an overkill to use COMSOL for that, you can also ask the interpolation function to approximate yor data, but I believe its limited to poloynomials -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content