Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
PEM water electrolysis
Posted 2025/02/05 15:03 JST Modeling Tools & Definitions, Modeling Workflow, Fuel Cells & Electrolyzers Version 6.3 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
As part of a research project I need to use Comsol to simulate PEM electrolysis. I have done the following available tutorials:
- Mass Transport Analysis of a High Temperature PEM Fuel Cell ( https://www.comsol.com/model/mass-transport-analysis-of-a-high-temperature-pem-fuel-cell-8550)
I was thinking that maybe there is a way to use the fuel cell created in the PEM Fuel cell tutorial and revert its process by changing some settings so it becomes an electrolysis PEM module instead. My problem is that, having no experience from Comsol, I do not know how to approach this.
Other tutorials online look at fuel cells while I need to simulate electrolysis.
Any help would be greatly appreciated.!
Hello Hyoung Joon Jeon
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.