Simple model not converging

Please login with a confirmed email address before reporting spam

Hi all,

I am trying to model electric field shielding with a copper box that has some holes in it. I feel as though this should be a very simple simulation for COMSOL to run, but for some reason my convergence plot plateaus before the specified tolerance of the solver. I have tried doing very fine meshing, and this did not help.

Does anyone know what I can do about this?

Thanks



1 Reply Last Post 2025/07/30 16:21 JST
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 hours ago 2025/07/30 16:21 JST

Kyle,

in the ec physics the solver needs a non-zero conductivity in all domains, also in air. You can start with something as low as 1 S/m or lower as long you get convergence.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Kyle, in the ec physics the solver needs a non-zero conductivity in all domains, also in air. You can start with something as low as 1 S/m or lower as long you get convergence. Cheers Edgar

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.