Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Setting a point to 1 and calculating impressed current density

Posted 2013/08/21 10:15 GMT-4 Version 4.3b 1 Reply

Gizem Bedir
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to set a point to 1 in my geometry, and calculate the impressed current density that it creates.

Gizem
1 Reply Last Post 2013/08/22 2:43 GMT-4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/08/22 2:43 GMT-4
Gizem,

a point current source creates a singularity with infinitely high current density.

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
Gizem, a point current source creates a singularity with infinitely high current density. Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content