Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

ellipse mesh

Posted 2010/03/18 7:15 GMT-4 5 Replies

Palms Connect
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
I am not able to mesh the ellipse and a line on the edge of the ellipse but i am able to do the same mapped mesh parameter for a line attached to the rectangle.
suggestions plz.
find time to check the attachment file,plz
cordially
5 Replies Last Post 2010/09/13 0:39 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/03/18 8:47 GMT-4
Hi
Read carefully the doc on meshing, but I do not beleive you can easily set up a "mapped mesh" on curved surfaces

Good luck
Ivar
Hi Read carefully the doc on meshing, but I do not beleive you can easily set up a "mapped mesh" on curved surfaces Good luck Ivar
Palms Connect
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/03/18 9:57 GMT-4
Dear moderator,
many thanks indeed. Tomorrow i will send the screenshot of the error message i get when i keep trying for mesh parameters for the ellipse model
cordially
Dear moderator, many thanks indeed. Tomorrow i will send the screenshot of the error message i get when i keep trying for mesh parameters for the ellipse model cordially
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/03/18 16:52 GMT-4
Hi

pls do, but have you tried a free tri/teth mesh ?
Hi pls do, but have you tried a free tri/teth mesh ?
Palms Connect
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/04/06 7:59 GMT-4










Hi Mod,
am now working on the 3D - semi-ellipsoid or better called as half ellipsoid.
once done with that i will revert back regarding the meshing proces for curved structures.
thanks for your input, i will be using free mesh to start with
cordially
ranga
Hi Mod, am now working on the 3D - semi-ellipsoid or better called as half ellipsoid. once done with that i will revert back regarding the meshing proces for curved structures. thanks for your input, i will be using free mesh to start with cordially ranga
Palms Connect
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/09/13 0:39 GMT-4
ho mod
is that possible to import ultrasound mammogram images to comsol
ultarsound & mammo images are in jpeg format and some in DICOM format
suggestions,plz
cordially
ranga
ho mod is that possible to import ultrasound mammogram images to comsol ultarsound & mammo images are in jpeg format and some in DICOM format suggestions,plz cordially ranga

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content