Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfer and fluid flow in molten pool

Posted 2013/11/08 14:46 GMT-5 Fluid & Heat, Heat Transfer & Phase Change Version 4.3b 0 Replies

Xiaoqing Cao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, all, I'm new to COMSOL and want to do a project to simulate the molten pool forming and fluid dynamics within this pool. Currently I 've tried 2 ways to model this process:
1) Heat transfer in solid with phase change and laminar flow method
2) Conjugate heat transfer and deformed geometry method

So, which one is the suitable way to model this? Any other idea or suggestion about this problem?

Thanks for your help~

0 Replies Last Post 2013/11/08 14:46 GMT-5
COMSOL Moderator

Hello Xiaoqing Cao

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content