Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

BH curves

Posted 2013/12/02 13:40 GMT-5 Low-Frequency Electromagnetics Version 4.3b 1 Reply

Clara Pacheco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
As I introduce BHcurves in um model AC/DC? i call the archive txt, but the simulation not acept.
Thanks
1 Reply Last Post 2013/12/03 9:28 GMT-5
Ralf Tschiesche
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/12/03 9:28 GMT-5
Hello!
This may help you:
www.comsol.de/community/forums/general/thread/26751/
Ralf
Hello! This may help you: http://www.comsol.de/community/forums/general/thread/26751/ Ralf

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content