Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

importing data to comsol

Posted 2014/07/03 3:36 GMT-4 Version 5.2 4 Replies

David Fernandez Bosman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everybody

It is possible to import data from a txt file to a 1D plot group?

I'm trying to compare two functions, for instance, the temperature vs. time, coming from different projects, and I would like to be able to plot them to the same Canvas, instead of exporting the data and to plot with another program.

Thank you!

David
4 Replies Last Post 2016/02/16 13:48 GMT-5
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014/07/03 8:37 GMT-4
You can do this in several way, for instance as follows:

- Results > Tables: Add a Table

- Click on Import and browse to the file that contains your data in column form.

- Go to the 1D plot group where you want to plot the table data.

- Add a Table Graph plot and change the value in the Table combo box to the table you just created.

You can do this in several way, for instance as follows: - Results > Tables: Add a Table - Click on Import and browse to the file that contains your data in column form. - Go to the 1D plot group where you want to plot the table data. - Add a Table Graph plot and change the value in the Table combo box to the table you just created.
David Fernandez Bosman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014/07/03 9:48 GMT-4
Hi Gunnar,

Thanks for your answer!

David
Hi Gunnar, Thanks for your answer! David
Sojwal Manoorkar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2016/02/16 9:41 GMT-5
Is there any way to plot imported data (X,Y,Z) on 3D streamline plot of COMSOL?
Is there any way to plot imported data (X,Y,Z) on 3D streamline plot of COMSOL?
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2016/02/16 13:48 GMT-5
Once your 3D data has been brought in, you can use all the usual post-processing tools to generate plots off that data. Chapter 20 of the Reference Manual, the Postprocessing and Visualization Handbooks (www.comsol.com/offers/Postprocessing-and-Visualization-Handbook-Part-1 and www.comsol.com/offers/Postprocessing-and-Visualization-Handbook-Part-2 ) and various post-processing blogs ( www.comsol.com/blogs/category/all/postprocessing/), videos and tutorials on this website cover these types of capabilities.
Best regards,
Jeff
Once your 3D data has been brought in, you can use all the usual post-processing tools to generate plots off that data. Chapter 20 of the Reference Manual, the Postprocessing and Visualization Handbooks (http://www.comsol.com/offers/Postprocessing-and-Visualization-Handbook-Part-1 and http://www.comsol.com/offers/Postprocessing-and-Visualization-Handbook-Part-2 ) and various post-processing blogs ( http://www.comsol.com/blogs/category/all/postprocessing/), videos and tutorials on this website cover these types of capabilities. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content