Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Random spatial distribution of n-numbers of carbon fibers

Posted 2014/09/09 10:17 JST Low-Frequency Electromagnetics 2 Replies

Elliot Carrillo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

It is posible to draw in Comsol n-numbers of carbón fibers in a confined volume with random spatial distribution?
2 Replies Last Post 2017/06/06 0:30 JST
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014/09/10 22:26 JST
There have been discussions about similar things before. Check www.comsol.com/community/forums/geometry/thread/47011/ and www.comsol.co.in/community/forums/general/thread/46371/ .
There have been discussions about similar things before. Check http://www.comsol.com/community/forums/geometry/thread/47011/ and www.comsol.co.in/community/forums/general/thread/46371/ .
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017/06/06 0:30 JST
Hello,

You may also find this approach (new to version 5.3) helpful:
www.comsol.com/blogs/how-to-create-a-randomized-geometry-using-model-methods/

Best Regards,
Hello, You may also find this approach (new to version 5.3) helpful: https://www.comsol.com/blogs/how-to-create-a-randomized-geometry-using-model-methods/ Best Regards,

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content