Menu

Discussion Forum

New Discussion
フィルター

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol 4.0 Level Set Method

Posted 2010/05/08 12:01 GMT-4 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.4 3 Replies

Stuart Savage
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have just started to play around with COMSOL version 4.0. It seems that the level set method has not been implemented. Am I correct or have I just failed to find it? The level set method or an alternative is an essential need for me.
3 Replies Last Post 2015/03/23 7:52 GMT-4
Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/05/10 5:30 GMT-4
Look in Fluid Flow->Multiphase Flow->Two-Phase Flow, Level Set.
There you will find the precoupled multiphysics interface with Navier-Stokes and Level Sets, which I assume is the most common modeling scenario.

I you want to experiment with Level Set only you can find the interface here:
Mathematics>Moving Interface>Level Set

Niklas Rom, COMSOL
Look in Fluid Flow->Multiphase Flow->Two-Phase Flow, Level Set. There you will find the precoupled multiphysics interface with Navier-Stokes and Level Sets, which I assume is the most common modeling scenario. I you want to experiment with Level Set only you can find the interface here: Mathematics>Moving Interface>Level Set Niklas Rom, COMSOL
Stuart Savage
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/05/10 13:27 GMT-4
Thanks very much - it's taking a while for me to get used to the new interface.
Thanks very much - it's taking a while for me to get used to the new interface.
Anangi Anil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015/03/23 7:52 GMT-4
how to track a particular point of the interface in level set method
how to track a particular point of the interface in level set method

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content