Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

complex relative permittivity

Posted 2010/06/17 12:54 GMT-4 2 Replies

Claire Sweetenham
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I need to enter a complex relative permittivity into material settings - can I do this and if so, how? The value is -9.96+0.82i.

Many thanks.
2 Replies Last Post 2013/03/27 1:48 GMT-4
Bryan Reed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2010/06/17 18:40 GMT-4
Yes, just enter it as the value for epsilonr and it should work.

But be aware that COMSOL uses the opposite convention for imaginary parts that a lot of the literature uses, such that a lossy material has a negative imaginary part of epsilon. So you should probably enter -9.96-0.82i.

Yes, just enter it as the value for epsilonr and it should work. But be aware that COMSOL uses the opposite convention for imaginary parts that a lot of the literature uses, such that a lossy material has a negative imaginary part of epsilon. So you should probably enter -9.96-0.82i.
Andrea Marie Scholl
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013/03/27 1:48 GMT-4
Does COMSOL define the complex relative permittivity in every version, especially in 4.3, as

epsilon = epsilon_real - j*repsilon_imag ?


I had to create a lookup table for my simulation and initially typed in
epsilon = epsilon_real - j*repsilon_imag .

Now I'm wondering whether it should not have been
epsilon = epsilon_real + j*repsilon_imag .
Does COMSOL define the complex relative permittivity in every version, especially in 4.3, as epsilon = epsilon_real - j*repsilon_imag ? I had to create a lookup table for my simulation and initially typed in epsilon = epsilon_real - j*repsilon_imag . Now I'm wondering whether it should not have been epsilon = epsilon_real + j*repsilon_imag .

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content