Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol user's guide

Posted 2010/08/03 7:18 JST 1 Reply

Asal Bidarmaghz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Does anyone know a good tutorial for comsol?
1 Reply Last Post 2010/08/03 14:02 JST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010/08/03 14:02 JST
Hi
I would say there is not one, but several (one per physis ++), check the web side too (under showcasse). The best is to follow a few of the 1D training courses with a couple of months in between, and then exercice

--
Good luck
Ivar
Hi I would say there is not one, but several (one per physis ++), check the web side too (under showcasse). The best is to follow a few of the 1D training courses with a couple of months in between, and then exercice -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content