Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

...

Posted 2009/09/21 20:51 JST 1 Reply

Sara Feb.
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

...
1 Reply Last Post 2009/09/22 1:27 JST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2009/09/22 1:27 JST
Hi

That's what "frequency response analysis" is for, it assumes harmonic excitation at frequency "freq_" (complete with the _... your application mode shortcut). Use the parameter fonctionality to sweep over frequency. Take a closer read through the specific documentation, you will find most replies therein

Good luck
Ivar
Hi That's what "frequency response analysis" is for, it assumes harmonic excitation at frequency "freq_" (complete with the _... your application mode shortcut). Use the parameter fonctionality to sweep over frequency. Take a closer read through the specific documentation, you will find most replies therein Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.