アプリケーションギャラリ

Electroless deposition or plating is a non-galvanic plating method that does not require any external electrical power. This technique is typically used for electroless plating of nickel, silver, gold and copper. In electroless deposition, partial oxidation and reduction reactions ... 詳細を見る

The model simulates non-premixed turbulent combustion of syngas (synthesis gas) in a simple round-jet burner. Syngas is a gas mixture, primarily composed of hydrogen, carbon monoxide and carbon dioxide. The name syngas relates to its use in creating synthetic natural gas. In the model, ... 詳細を見る

潜水艦では, ソナー反射を低減するために無響コーティングが使用されています. このモデルは, 鋼板上の無響コーティングの反射, 吸収, 透過特性を計算します. このサブモデルで計算された結果は, 例えばインピーダンス境界条件を適用することで, より大規模なシステムスケールモデルで使用できます. 検討したセットアップは, V. Leroy, A. Strybulevych, M. Lanoy, F. Lemoult, A. Tourin, and J. H. Page: ”Superabsorption of acoustic waves with bubble ... 詳細を見る

This model demonstrates how to simulate a piezoelectric transducer as both a sound transmitter and a receiver in a well logging setup. Other applications of this setup are, for example, in the field of nondestructive testing. A transmitting transducer is connected to an electrical ... 詳細を見る

At the electrode-electrolyte interface, there is a thin layer of space charge in a diffuse double layer. This may be of interest when modeling devices such as electrochemical capacitors and nanoelectrodes. This tutorial example shows how to couple the Nernst-Planck equations to the ... 詳細を見る

このモデルは, COMSOL Multiphysics で流体構造相互作用問題を設定する方法を示しています. 流体の流れが固体構造をどのように変形するか, また連続的に変形するジオメトリで流れを解く方法を示しています. 流体構造相互作用 (FSI) マルチフィジックスインターフェースは, 流体の流れと固体力学を組み合わせて, 流体と固体構造の相互作用を捉えます. 固体力学インターフェースと単相流インターフェースは, それぞれ固体と流体をモデル化します. FSI カップリングは, 流体と固体の境界に表示されます. 流体構造相互作用インターフェースは, ... 詳細を見る

This example models cathodic protection of a steel reinforcing bar in concrete. Three different electrochemical reactions are considered on the steel surface. Charge and oxygen transport are modeled in the concrete domain, where the electrolyte conductivity and oxygen diffusivity depend ... 詳細を見る

Piezoelectric devices are widely used as sources to generate sound waves or receivers to detect acoustic signals. In applications such as ultrasound imaging and nondestructive testing, the same transducer can be used as a transmitter to send a source signal and receiver to detect ... 詳細を見る

This 2D example of a vanadium flow battery demonstrates how to couple a secondary current distribution model for an ion-exchange membrane to tertiary current distribution models for two different free electrolyte compartments of a flow battery. The Ion-Exchange Membrane boundary node ... 詳細を見る

This model describes the three heat transfer modes: conduction, convection, and radiation, combined with nonisothermal flow in a realistic geometry representing a light bulb and the surrounding air. The LED chips dissipate heat. The model computes the equilibrium temperature induced by ... 詳細を見る