アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効な COMSOL ライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
This tutorial models the cathodic protection of an oil rig structure during a time period of 15 years. As a result of the consumption of the sacrificial anodes, the protective capabilities system are reduced over time. The anode shape change in the model is defined by using the Level ... 詳細を見る
This tutorial shows the analysis of a car cabin in order to study the performance of a sound system in the low to mid frequency range. The cabin is of a typical sedan interior, that is, the inside of a hard-top family car. The model studies the frequency response at the location of a ... 詳細を見る
ヘルムホルツコイルは, 半径1つ分離れた2つの同一の円形コイルを平行に並べたものであり, 両方のコイルに電流が同じ方向に流れるように巻かれています. この巻き方により, コイル間に均一な磁場が生じ, 主な成分は2つのコイルの軸に平行になります. ヘルムホルツコイルの用途は, 地球の磁場を打ち消すことから, 実験やそれを必要とするアプリケーション用の磁場の生成まで多岐にわたります. ヘルムホルツ磁場の生成は, アプリケーションに応じて, 静的, 時間変動 DC, または AC になります. 詳細を見る
The example Stiffness Analysis of a Communication Mast’s Diagonal Mounting in the COMSOL Multiphysics Model Library shows how you can modify a 3D CAD model to improve its performance. In that case, the applied changes were based solely on the analyst’s experience with similar structures. ... 詳細を見る
真空乾燥は, 製薬業界や食品業界で, 湿った粉末から水や有機溶媒を除去するために頻繁に用いられる化学プロセスです. 真空乾燥システムを設計する際, エンジニアは製品の品質を高く維持しながら乾燥時間を最小限に抑えることを目指します. このモデルは, Nutsche 式フィルタードライヤーにおける真空乾燥を調査します. Nutsche 式フィルタードライヤーは, 湿ったケーキが充填された円筒形のドラムで構成されています. ケーキの上部は低圧のヘッドスペースにさらされ, 側壁と底壁は加熱流体にさらされます. 非常に低い圧力と高温で動作させることで, 液体の蒸発速度が増加し, ... 詳細を見る
An electrostatically actuated MEMS resonator is simulated. The device is driven by an AC + DC bias voltage applied across a parallel plate capacitor. In this example, the pull-in and pull-out voltages of the resonator are computed. This is done via a quasi-static analysis of the ... 詳細を見る
This tutorial model demonstrates how to set up a parameter estimation study for fitting the material parameters of an Ogden hyperelastic model to experimental data. The procedure considers multiple load cases under large deformations, which is often necessary to obtain constitutive ... 詳細を見る
In this example, a torque is applied to the inner edge of a circular annulus-shaped membrane while the outer edge is fixed, resulting in membrane wrinkling. The wrinkling membrane model avoids the equilibrium instability that would be produced by the compressive stresses. The effect of ... 詳細を見る
This model builds on the photonic crystal model, where a photonic crystal structure is studied. This structure has a band gap, so only waves within a specific frequency range will propagate through the outlined guide geometry. This model changes the position of the pillars in order to ... 詳細を見る
MOSFETs typically operate in three regimes depending on the drain-source voltage for a given gate voltage. Initially the current-voltage relation is linear, this is the Ohmic region. As the drain-source voltage increases the extracted current begins to saturate, this is the saturation ... 詳細を見る