Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

COMSOL Assisted Simulation of Laser Engraving

H. Karbasi
Conestoga College, Kitchener, ON, Canada

The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam as a source of heat over physical domain made of different materials. Through interaction modeling of ...

Simulations of Meniscus Motion and Evaporation for Convective Deposition Manufacturing

J. Xiao, and D. Attinger
Columbia University, New York, NY, USA

Convective deposition is a material processing technique where an evaporating meniscus of a colloidal suspension is dragged along a solid substrate to deposit layers of micro or nanoparticles. The process is a typical multiphysics process where fluid dynamics, mass and heat transfer come into play in a small deforming domain. In this work, we describe an Arbitrary Lagrangian-Euler model ...

Coil Systems to Generate Uniform Magnetic Field Volumes

J.C. Olivares-Galvan[1], E. Campero-Littlewood[1],
R. Escarela-Perez[1], S. Magdaleno-Adame[2], and E. Blanco-Brisset[2]
[1] Universidad Autonoma Metropolitana - Azcapotzalco, Mexico City, DF, Mexico
[2] Cipress No. 88, Col. Las Arboledas, La Piedad, MH, Mexico.

This paper analyzes different types of coil systems to produce volumes of uniform magnetic field. Some types of coil system are presented in this paper such as Helmholtz, Merritt, and Ruben coil systems. In the study coil systems are intended to produce a magnetic flux density of 2µT in the center of the coil. The calculation of the magnetic flux density is done with COMSOL using analytical ...

Failure Stress Analysis of Fiber Reinforced of Composite Laminates under Uniaxial/Biaxial Loading

Z. Hasan[1], F. Darwish[2], and S. Al-Absi[2]
[1]Texas A&M University, College Station, TX, USA
[2]Jordan University of Science and Technology, Irbid, Jordan

The main objective of the present work is to perform stress analysis on composite laminates under unaxial/biaxial loading to serve as a preliminary data for test verification. A detailed calculation based on the Classical Lamination Theory was performed for a laminate. The material used was carbon/epoxy applying a pure uniaxial load followed by a biaxial load. It was observed that the failure ...

Modeling Horizontal Ground Heat Exchangers in Geothermal Heat Pump Systems

A. Chiasson
University of Dayton, Dayton, OH, USA

Geothermal heat pumps use the earth as a heat source and sink via a ground heat exchanger (GHX) that consists of a network of buried heat exchange pipes, which can either be installed in vertical boreholes or in shallow horizontal trenches or excavations. The main goal in GHX design is to determine the minimum length of pipe needed to provide adequate fluid temperatures to heat pumps over their ...

Understanding Ferrofluid Spin-Up Flows in Rotating Uniform Magnetic Fields

S. Khushrushahi, and M. Zahn
Massachusetts Institute of Technology, Cambridge, MA, USA

A fully filled sphere of ferrofluid has constant demagnetizing factors in all three Cartesian directions such that when subjected to a uniform external rotating magnetic field the internal field is also uniform, and ultrasound measurements give no observable flow. Non-uniform magnetic fields or a non-uniform distribution of susceptibility are necessary conditions for ferrofluid spin-up flows in ...

Characterization of an AlGaN/GaN Electrostatically Actuated Cantilever Using the Finite Element Method

N. DeRoller, M. Qazi, J. Liu, and G. Koley
University of South Carolina, Columbia, SC, USA

AlGaN/GaN heterostructures are unique because the 2DEG at the interface is created by the difference in polarization properties of the AlGaN and the GaN layers; not due to intentional doping. In this work, a 3D model of an electrostatically actuated micro cantilever has been developed using COMSOL for characterization using the finite element method (FEM). The microcantilever has AlGaN/GaN HFET ...

Numerical Simulation of Exact Two-Dimensional Governing Equations for Internal Condensing Flows

S. Mitra, R. Naik, and A. Narain
Michigan Technological University, Houghton, MI, USA

The paper outlines a two-dimensional computational methodology and presents results for laminar/laminar condensing flows inside mm- scale ducts. The methodology has been developed using MATLAB/COMSOL platform and is currently capable of simulating film-wise condensation for steady and unsteady flows. The results obtained are shown to be in agreement with an independently developed quasi-one ...

Modeling Thickness Shear Mode Quartz Sensors for Increased Downhole Pressure & Temperature Applications

G.R. Kirikera, W. Patton, and S.M. Behr
Geophysical Research Company LLC, Tulsa, OK, USA

Numerous sensors based on various sensing principles are used to measure pressures and temperatures in wellbores. Of all these sensors, piezoelectric quartz is the most preferred means of sensing pressure and temperature and is probably the only sensor to meet stringent downhole measurement requirements. The sensor consists of a quartz piezoelectric resonator hermetically sealed between two ...

Modeling Energy Harvesting From Membrane Vibrations in COMSOL

R.K. Kapania, R.C. Singh, and C. Sultan
Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

This paper presents an ongoing effort, motivated by developing self-contained sensors for structural health monitoring of inflatable structures, to model the process of extracting useable electrical power from the mechanical vibrations of thin, prestressed membrane structures. Energy harvesting from mechanical vibrations of these structures may provide enough power to operate both the sensors as ...