COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
One of the most important criteria for evaluating chemical enhanced oil recovery (EOR) processes that use polymers is its rheological behaviour which in turn account for other physical effects of adsorption and resistance factors during polymer-rock interactions. However, complete ... 詳細を見る
A mathematical model is developed for the stripping of CO2 from rich solvent. The rich solvent (aqueous NaOH) is used in CO2 absorption from natural gas through gas-liquid hollow fiber membrane contactor. The polyvinylidene fluoride (PVDF) hollow fiber membrane was fabricated via ... 詳細を見る
The authors are currently investigating the use of bulk high temperature superconductors as trapped field magnets (TFMs) in order to increase the electrical and magnetic loading of an axial gap, trapped flux-type superconducting electric machine. In electric machines, the use of ... 詳細を見る
ELENA is a small cooler decelerator ring at CERN which will be built to increase substantially the number of usable antiprotons delivered to experiments for studies with antihydrogen and antiprotonic nuclei. COMSOL Multiphysics® software has been used to completely model the ELENA ... 詳細を見る
Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA) are commonly used for separation/purification of gas mixtures in industrial processes. The cycle time of industrial TSA processes usually ranges from several hours to days. The reason for this long cycle time is the ... 詳細を見る
Introduction Electromagnetic stimulation is a common therapy to support bone healing in cases of avascular necrosis or pseudarthrosis. An electrostimulative screw implant (Asnis III s-series screw in Figure 1) is used to stimulate bone regeneration in the treatment of femoral head ... 詳細を見る
YBCO Coated Conductors (CCs), used for applications in Resistive Superconducting Fault Current Limiters (RSFCLs), are known to have insufficiently high Normal Zone Propagation Velocity (NZPV) during quench events. The improvement can be made by enhancing the thermal conductivity of YBCO ... 詳細を見る
The evaluation of defect size and nature are two most controversial topics in ultrasonic flaw detection. The operation consists of an application of ultrasonic waves to pipes in order to detect metal loss and other defects in the pipe wall due to corrosion and other degradation ... 詳細を見る
Ohmic heating (Joule heating) is a volumetric heating technology which can effectively process almost any pumpable fluid with extremely high energy efficiency (>95%). This is particularly useful for very thick fluids, those that burn on to hot surfaces and those with high solids content ... 詳細を見る
A installation caused severe hum, with 30 Hz as dominant frequency, causing serious annoyance. The acoustic study showed resonances around 30 Hz. Poor flow conditions existed at the inlet and outlet of the forced draft fan. Flow patterns were studied using CFD. Both the inlet and ... 詳細を見る