COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
Solar drying is a ubiquitous method that has been adopted for many years as a food preservation method. Most of the published articles in the literature provide insight on the performance of solar dryers in service but little information on the dryer construction material selection ... 詳細を見る
In the context of increasing demographic pressures around the world, soil improvement techniques constitute viable alternatives to expensive foundations. Among these techniques, the biocalcification of granular soils appears as a promising alternative relying on the formation of calcium ... 詳細を見る
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... 詳細を見る
The XENON Dark Matter Experiment utilizes ultra-pure xenon (Xe) as a target for particle interaction in the effort to detect dark matter particles. To measure the purity of Xe, a gas purity monitor (GPM) is being developed which drifts electrons through Xe gas to detect impurities that ... 詳細を見る
Ubiquitous, unobtrusive wearable computing has tremendous potential for impacting many applications including medical, personal entertainment and surveillance. Advances in the underlying technology have allowed for consistent reduction in the size and weight of emerging solutions, with ... 詳細を見る
To the best of our knowledge, only few researchers have made attempts to minimize the erosion in bends by modifying the bend configuration in order to alter the particle-laden flow pattern to reduce the erosion. In this work, we revisited those previously proposed bend configurations to ... 詳細を見る
This poster presents the design and analysis of a novel horseshoe shaped MEMS actuator for adaptive optics. The actuation mechanism is Lorentz force enabling low current (below 10 mA) operation. The actuator combined with an overlying aluminum coated SU-8 soft polymer membrane for the ... 詳細を見る
Beam steering and adaptive optics micromirror applications commonly demand optically flat surfaces with minimal mass. When reflective coatings (usually metallic Au or Al) are applied to micromirror surfaces in order to meet optical reflectivity requirements the resulting film stress ... 詳細を見る
COMSOL Multiphysics® software is used to understand the difference in behaviour of two Magnetic Barkhausen Noise (MBN) probes. The dipole probe has to be physically rotated to sample the angular distribution of the MBN. The tetrapole probe uses vector superposition to rotate the magnetic ... 詳細を見る
This work aims to investigate the behaviour of a simple interdigital sensor structure for glucose monitoring in response to distortions in the skin-topology and differences in skin undulation during use. The study then extends to consider a flexible sensor structure which is better able ... 詳細を見る