研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
Balanced armature (BA) receivers are miniaturized loudspeakers used in hearing aid instruments, earphones, and hearables. A typical design of a BA receiver includes an armature (metal strip) that is placed between two permanent magnets and a coil that is wound around the armature. The ... 詳細を見る
Condenser microphones will have an electrical output for any displacement of the membrane relative to the back plate, which is usually bound to the microphone housing. For the typical use case, a pressure input will create a pressure difference across the membrane, which causes a ... 詳細を見る
Traffic noise pollution has represented a significant challenge for modern societies, requiring the development of innovative noise mitigation strategies. In the last decades, intensive research has been developed into the design and evaluation of noise barriers but there still lacks a ... 詳細を見る
In structural optimization, the norm has long been to use maximum stress or compliance as objectives to be minimized. However, probabilistic quantities, such as the probability of failure, offer a fresh and powerful alternative. These quantities are inherently dimensionless, confined to ... 詳細を見る
One way to extract piezoelectric material data from measurements is to utilize vibrational eigenmodes of block-shaped test specimens (Rupitsch 2015). Within a simulation-aided approach this results in optimizing the values of the material data parameters to fit the experimental result, ... 詳細を見る
FT wind sensors measure wind speed and direction using an acoustic field superimposed on a flow field in an acoustic resonator equipped with three piezoelectric transducers. The study proposed here focuses on the acoustic resonance technology of a simplified wind sensor geometry, and how ... 詳細を見る
Introduction The echolocation signals of dolphins consist of forward-projected sound pulses that reflect off objects and are used to probe underwater surroundings. Despite rigorous studies of dolphin echolocation, there remain questions about how echolocation sounds are produced and ... 詳細を見る
Polydimethylsiloxane (PDMS) is a biocompatible material widely used in biomedical applications such as implantable sensors. A realistic modeling of PDMS in acoustic-mechanic simulation is useful especially for medical applications which use ultrasonic waves as interrogation source. ... 詳細を見る
The design of products in the audio industry is to a large extent done via a combination of prior knowledge and trial-and-error. Such an approach will sometimes be seen described as an ‘optimization’ of said products, but we will here focus on the formal mathematical approach of ... 詳細を見る
Ultrasonic flow-cell reactors are used for many industrial applications, where fluid substrate is sonicated in a small region, where very high ultrasonic acoustic power is present. The electromechanical transducer (converter) that drive the sonotrode inside the flow-cell is designed in ... 詳細を見る
