技術情報とプレゼンテーション

Microwave heating has been used in industry because of its pollution free and rapid heating technique [1]. It consists of an electromagnetic wave that passes through a media with a frequency between 300 MHz and 300 GHz [2] to generate heat in the system. The purpose of the current work ... 詳細を見る

Microreactors have gained popularity in fuel production industry. This is due to its high surface area to volume ratio, enhanced mass and heat transfer, short residence time and a more sustainable practice. The catalytic hydrodeoxygenation (HDO) reaction of 4-Propylguaiacol (4PG) to 4 ... 詳細を見る

Many industrial applications require special treatments for fluid products, such as: deagglomeration, dispersion, homogenization, emulsion, special mixing or even catalysis of chemical reactions. Such effects can be obtained through cavitation in a closed ultrasonic reactor, in which it ... 詳細を見る

For civil engineering structures the interaction between concrete, its reinforcing steel bars and various environmental agents like humidity, CO2, O2 , and chloride is extremely important. Generally, the concrete provides appropriate conditions to prevent steel reinforcement bars from ... 詳細を見る

Using the software COMSOL Multiphysics® based on the finite element method, a one-dimensionnal model has been developed to predict the transient behavior of a gaseous hydrogen flow through a porous bed. The problem is solved at a macroscopic scale, therefore, the porous bed is seen as a ... 詳細を見る

Biodegradable scaffolds are often inserted in the body, to provide mechanical support to recovering broken or damaged tissues. Monitoring the degradation chemistry and mechanical response of these scaffolds is important: their degradation rate should match tissue regeneration rate, while ... 詳細を見る

Granular and powdered activated carbons have been widely used for purification/filtration in air and water as catalysts or organic adsorbents. To obtain mechanical filtration capacity and inorganic reduction performance, activated carbon can be formed as a block-shaped porous media, ... 詳細を見る

The DOE BETO consortium "ChemCatBio" has developed a packed bed catalyst for use in a Catalytic Fast Pyrolysis (CFP) process for producing biofuels and chemicals from lignocellulosic biomass. Another BETO consortium known as "CCPC"  (Consortium for Computational Physics and Chemistry) is ... 詳細を見る

Electrochemical systems are devices or processes in which an ionic conductor mediates the interconversion of chemical and electrical energy. This paper presents a model to simulate the electroplating of copper in a microcavity typically found in the plating of copper onto circuit ... 詳細を見る

Modern adiabatic calorimeters are designed to keep thermal inertia as low as possible so that temperature-dependent reaction rates and heats of reaction can be accurately extracted from the thermocouple data. Published models of this type of equipment are generally zero dimensional (0D) ... 詳細を見る